%% 
%% This is file `tabularx.sty', generated 
%% on <1992/10/29> with the docstrip utility (2.0r).
%% 
%% The original source files were:
%% 
%% tabularx.doc  (with options: `style')
%% 
%% This file is part of the array package. 
%% --------------------------------------- 
%% 
%% It is a contributed file. 
%% In case of errors please inform the original author. 
%% 
%% The checksum in the header refers to the documented version of 
%% the file. 
%% 


%%% ====================================================================
%%%  @LaTeX-style-file{
%%%     author          = "David Carlisle",
%%%     version         = "1.04",
%%%     date            = "02 September 1992",
%%%     time            = "14:14:27 BST",
%%%     filename        = "tabularx.sty",
%%%     address         = "Computer Science Department
%%%                        Manchester University
%%%                        Oxford Road
%%%                        Manchester
%%%                        England
%%%                        M13 9PL",
%%%     telephone       = "+44 61 275 6139",
%%%     FAX             = "+44 61 275 6236",
%%%     checksum        = "26599 791 3987 29287",
%%%     email           = "carlisle@cs.man.ac.uk (Internet)",
%%%     codetable       = "ISO/ASCII",
%%%     keywords        = "LaTeX, tabular, tabularx",
%%%     supported       = "yes",
%%%     docstring       = "
%%%
%%%     tabularx.sty
%%%
%%%     A LaTeX style option defining the tabularx environment. This is
%%%     like tabular*, except that the widths of certain `p' columns are
%%%     modified to achieve the desired total width, rather than the
%%%     width of the inter-column space.
%%%
%%%          \begin{tabularx}{final width}{tabular-preamble}
%%%              tabular body
%%%          \end{tabularx}
%%%
%%%     In the {tabular-preamble} argument, X should be used to denote a
%%%     column that gets the final specification of p{<whatever width is
%%%     needed>}. So for example
%%%          \begin{tabularx}{250pt}{|cXcX|} ...
%%%     is equivalent to
%%%          \begin{tabular*}{250pt}{|cp{??}cp{??}|} ...
%%%     where the ?? is chosen automatically.
%%%
%%%     This style requires array.sty.
%%%
%%%     Documentation requires Mittelbach's doc.sty.
%%%
%%%     The checksum field above was produced by
%%%     Robert Solovay's checksum utility.",
%%%  }
%%% ====================================================================
\def\fileversion{v1.04}
\def\filedate{92/09/02}
\def\docdate {92/09/02}
\@ifundefined{TX@target}{}{\endinput}
\wlog{Style-Option: `tabularx' \fileversion
         \space\space <\filedate> (D.P.C.)}
\wlog{English documentation dated \space <\docdate> (D.P.C.)}

\@ifundefined{newcolumntype}{\input array.sty}{}
\newdimen\TX@col@width
\newdimen\TX@old@table
\newdimen\TX@old@col
\newdimen\TX@target
\newdimen\TX@delta
\newcount\TX@cols
\newif\ifTX@
\def\tabularx#1#2{%
  {\ifnum0=`}\fi
  \TX@target=#1
  \TX@typeout{Target width: #1 = \the\TX@target.}%
  \@temptokena={#2}\toks@={}\TX@get@body}
\long\def\TX@get@body#1\end
  {\toks@=\expandafter{\the\toks@#1}\TX@find@end}
\def\TX@find@end#1{%
  \def\@tempa{#1}%
  \ifx\@tempa\TX@\expandafter\TX@endtabularx
  \else\toks@=\expandafter
    {\the\toks@\end{#1}}\expandafter\TX@get@body\fi}
\def\TX@{tabularx}
\def\TX@endtabularx{%
  \expandafter\TX@newcol\expandafter{\tabularxcolumn{\TX@col@width}}%
  \let\verb\TX@verb
  \global\count@=\csname c@\@mpfn\endcsname
  \TX@old@table=\maxdimen
  \TX@col@width=\TX@target
  \global\TX@cols=\@ne
  \TX@typeout
    {\@spaces Table Width\@spaces Column Width\@spaces X Columns}%
  \TX@trial{\def\NC@rewrite@X{%
          \global\advance\TX@cols\@ne\NC@find p{\TX@col@width}}}%
  \loop
    \TX@arith
    \ifTX@
    \TX@trial{}%
  \repeat
  \global\csname c@\@mpfn\endcsname=\count@
  {\let\@footnotetext\TX@ftntext\let\@xfootnotenext\TX@xftntext
    \csname tabular*\expandafter\endcsname\expandafter\TX@target
       \expandafter{\the\@temptokena}%
      \the\toks@
    \csname endtabular*\endcsname}%
  \global\TX@ftn\expandafter{\expandafter}\the\TX@ftn
  \ifnum0=`{\fi}%
  \end{tabularx}}
\def\TX@arith{%
  \TX@false
  \ifdim\TX@old@table=\wd\@tempboxa
    \TX@col@width=\TX@old@col
    \TX@typeout{Reached minimum width, backing up.}%
  \else
    \dimen@=\wd\@tempboxa
    \advance\dimen@ -\TX@target
    \ifdim\dimen@<\TX@delta
      \TX@typeout{Reached target.}%
    \else
      \ifnum\TX@cols>\@ne
        \advance\TX@cols by \m@ne
      \fi
      \divide\dimen@ by \TX@cols
      \advance\dimen@ by -\TX@col@width
      \ifdim \dimen@ > \z@
        \TX@typeout{Columns too narrow.}%
      \else
        \TX@old@col=\TX@col@width
        \TX@old@table=\wd\@tempboxa
        \TX@col@width=-\dimen@
        \TX@true
      \fi
    \fi
  \fi}
\TX@delta=\hfuzz
\newcolumntype{X}{}
\def\tabularxcolumn#1{p{#1}}
\def\TX@newcol{\newcol@{X}[0]}
\def\TX@trial#1{%
  \setbox\@tempboxa=\hbox{%
    #1\relax
  \let\@footnotetext\TX@trial@ftn
  \global\csname c@\@mpfn\endcsname\count@
  \let\TX@vwarn\@empty
   \expandafter\let\expandafter\tabularx\csname tabular*\endcsname
   \expandafter\let\expandafter\endtabularx\csname endtabular*\endcsname
    \hbadness=\@M\hfuzz=\maxdimen
    \let\hbadness=\@tempcnta\let\hfuzz=\@tempdima
    \expandafter\tabular\expandafter{\the\@temptokena}%
      \the\toks@
    \endtabular}%
  \TX@typeout{\@spaces
     \the\wd\@tempboxa\@spaces\the\TX@col@width\@spaces\the\TX@cols}}%
\def\arraybackslash{\let\\=\@arraycr}
\def\tracingtabularx{\let\TX@typeout\typeout}
\let\TX@typeout\@gobble
\newtoks\TX@ftn
\long\def\TX@ftntext#1{%
  \edef\@tempa{\the\TX@ftn\noexpand\footnotetext
                    [\the\csname c@\@mpfn\endcsname]}%
  \global\TX@ftn\expandafter{\@tempa{#1}}}%
\long\def\TX@xftntext[#1]#2{%
  \global\TX@ftn\expandafter{\the\TX@ftn\footnotetext[#1]{#2}}}
\long\def\TX@trial@ftn#1{}
{\uccode`\*=`\ %
\uppercase{\gdef\TX@verb{%
  \leavevmode\null\TX@vwarn
  {\ifnum0=`}\fi\tt\let\\\ignorespaces
  \@ifstar{\let~*\TX@vb}{\TX@vb}}}}
\def\TX@vb#1{\def\@tempa##1#1{\toks@{##1}\edef\@tempa{\the\toks@}%
    \expandafter\TX@v\meaning\@tempa\\ \\\ifnum0=`{\fi}}\@tempa!}
\def\TX@v#1!{\afterassignment\TX@vfirst\let\@tempa= }
\begingroup
\catcode`\*=\catcode`\#
\catcode`\#=12
\gdef\TX@vfirst{%
  \if\@tempa#%
    \def\@tempb{\TX@v@#}%
  \else
    \let\@tempb\TX@v@
    \if\@tempa\space~\else\@tempa\fi
  \fi
  \@tempb}
\gdef\TX@v@*1 *2{%
  \TX@v@hash*1##\relax\if*2\\\else~\expandafter\TX@v@\fi*2}
\gdef\TX@v@hash*1##*2{*1\ifx*2\relax\else#\expandafter\TX@v@hash\fi*2}
\endgroup
\def\TX@vwarn{%
  \@warning{\noexpand\verb may be unreliable inside tabularx}%
  \global\let\TX@vwarn\@empty}
\endinput
%% 
%% End of file `tabularx.sty'.